DIY Wooden Stocking Holders

I can’t believe how quickly this year is coming to a close. Here we are in December already! Today I’m sharing how to make these DIY wooden stocking holders.

Disclosure: This post is sponsored by Kreg. All opinions are my own.

This was a fun little project and you could easily customize them by using any embellishments you choose. I picked up the glitter snowflakes from the craft store, but the options are endless.

I used my Kreg Jig 520PRO for this project. As you know by now, it’s my favorite pocket hole jig because it’s lightweight, portable, and user-friendly.

I used a 1×6 board for this and assembled it with 1 1/4″ pocket hole screws.

I used a hot glue gun for the snowflake but you could use a brad nailer instead if you want a stronger, more permanent hold.

After staining and adding the snowflake, I added a little key hook to the front using a small screw.

Be sure to hop over to the Kreg site for the build plans and full step by step tutorial!